BPXPG - INTERIOR LATEX EGGSHELL BASES & COLORS, 30-
- MSDS: BPXPG
- Manufacturer: NUBRITE CHEM CO KYANIZE PAINT
- Product Name: INTERIOR LATEX EGGSHELL BASES & COLORS, 30-
- National Stock Number: 8010-00N034335
Product Identification
Product ID:INTERIOR LATEX EGGSHELL BASES & COLORS, 30-
MSDS Date:02/13/1992
FSC:8010
NIIN:00N034335
MSDS Number: BPXPG
Responsible Party
EVERETT, MA 02149
US
Emergency Phone: 800-255-3530;800-424-9300(CHEMTREC)
Info Phone: 617-387-5000
Cage: IO381
Contractor
Telephone: 617-387-5000
Cage: IO381
Ingredients
NON HAZARDOUS INGREDIENTS
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
CLAY;(KAOLIN)
CAS: 1332-58-7
RTECS: GF1670500
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
TALC (POWDER) CONTAINING NO ASBESTOS FIBERS
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ADVERSE HEALTH EFFECTS FROM VAPORS OR
SPRAY MIST IN POORLY VENTILATED AREAS MAY INCLUDE IRRITATION OF
MUCOUS MEMBRANES. PROLONGED CONTACT WITH SKIN OR EYES MAY CAUSE
IRRITATION. CHRONIC:UNKNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:PROMPTLY WASH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. CALL MD IF IRRITATION PERSISTS. SKIN:WASH THOROUGHLY WITH
SOAP & WATER. INGEST:CALL MD. INHAL:MOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) .
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:ANY CONVENTIONAL METHOD.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PRODUCT WILL NOT BURN BUT MAY SPATTER IF
TEMPERATURE EXCEEDS BOILING POINT. POLYMER FILMS ARE CAPABLE OF
BURNING, GIVING OFF OXIDES OF CARBON/NITROGEN.
Accidental Release
Spill Release Procedures:DIKE AND CONTAIN SPILL WITH INERT MATERIAL,
SAND, ETC. KEEP SPILLS AWAY FROM STREAMS AND WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT FREEZE. MAXIMUM STORAGE
TEMPERATURE IS 120F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK.
Ventilation:USE LOCAL EXHAUST.
Protective Gloves:WATERPROOF GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CHEMICAL RESISTANT APRON IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:35-75 (WT).
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>193F,>89C
Vapor Density:HVR/AIR
Spec Gravity:1.35
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NOT APPLICABLE.
Disposal
Waste Disposal Methods:CONVENTIONAL METHODS IN COMPLIANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.